It is not Voopoo’s first attempt at Pod-type electronic cigarettes. The team built their success at VapExpo 2019 in Las Vegas, where the brand won the innovation prize thanks to the Vinci Pod.
The manufacturer presents the two versions of its new all-in-one Pod concept. Drag X and Drag S Pods. They are both Pod-type electronic cigarettes with Vintage imitation Leather design, rechargeable in USB-C, and share the same PnP resistors as the Pod Vinci.
Although indirect inhaling (MTL) is possible with the highest PnP coils (R1 0.8 ohm & VM4 0.6 ohm), these two pods clearly aim at beginners of aerial vape in direct inhaling (DL).
It produces big clouds in perspective for fans of Cloud Chasing, which can even be evaluated thanks to the Score Ranking option enabled by the Gene-TT chipset fitted to the two Pods.
Design
The imitation leather coating that surrounds the body of these two pods is of the most beautiful effect in addition to being perfectly glued. Voopoo offers no less than seven versions in a resolutely vintage style, from carbon fiber texture to imitation leather.
Large Transparent And Magnetic Cartridges
The Drag X and Drag S Pods cartridges are precisely the same and are therefore compatible between the two models. It is made from food-grade PCTG. The reservoir is molded in one piece and features a wide mouthpiece. The 510 Drip Tip insight is non-removable.
The bell-shaped cartridges are transparent and have a comfortable capacity of 4.5ml. The visibility is perfect, and we can easily control the level of E-Liquid while minimizing the risk of Dry Hit.
There are four magnets located under the lower part of the cartridges. They guarantee a perfect hold for the rest of the battery. The filling is done from below via a small hole protected by a black silicone tab located next to the location of the resistance. It’s simple, clean, and fast.
Â
An Airflow System With Two Openings
Between steam production and the explosion of flavors, there is no dilemma: Voopoo has designed an Airflow system as efficient as its aesthetic. Two large openings are present on each side of the upper part of the Drag X and Drag S batteries, thus allowing the air to circulate directly under the resistance.
A pretty little metal latch allows you to adjust the airflow to obtain a more or less restrictive draw.
Capacity And Power
At first glance, only their size differentiates them: 95mm in height for the Pod Drag X (158g) against 87mm for the Pod Drag S (146g). Therefore, the Drag S wins the prize for compactness and will slip more discreetly into any pocket.
The two pods have a diameter of 28mm and differ mainly in their power:
- The Pod Drag X works with a 18650 battery (not supplied) and offers an adjustable power of 80W
- The Drag S has a built-in 2500 mah battery for an adjustable power of up to 60W.
Therefore, the Drag X offers greater autonomy and power than the Drag S and wins this showdown.
Pod Drag S Features
Three modes are available to the Drag S program. Three consecutive presses make the mode change on the Fire button. The GENE-TT chipset automatically recognizes the resistance value and secures the vape by limiting the power in Watts (except in RBA mode). Dry Hit is not possible with SMART modes!
- Smart Press mode: They classically trigger the vaporization via the Fire button
- Smart P&A mode: This mode detects suction and triggers automatic vaporization without having to press the Fire button (option not available on Drag X)
- RBA mode: The resistance value is recognized in the other two modes. This mode removes the Watts limit imposed by the other two. Be careful to consider the maximum power recommended on the resistors used.
The other features offered by the GENE-TT chipset are a battery life indicator, a Puff counter, and the very fun Score Ranking mode.
Â
Pod Drag X Features
Two modes are available on the Pod Drag X side. Two consecutive presses also carry out the change of mode on the Fire button. As on the Drag S, the GENE-TT chipset automatically recognizes the value of the resistance and secures the vape by limiting the power in Watts to Smart mode (Red).
- Smart mode: Classic power setting in Watts with power limiter (power limited to the maximum recommended depending on the resistance used)
- RBA Mode: This mode removes the Watts limit imposed by SMART mode. Be careful to take into account the maximum power recommended on your resistance.
As on the Drag S, we find the features offered by the GENE-TT chipset, such as the autonomy indicator, the Puff counter, and the Score Ranking mode.
Score Ranking Mode
Are you chasing the clouds? Voopoo puts you to the test with the Score Ranking mode! The GENE-TT chipset evaluates your abilities in terms of Cloud Chasing and awards you a certain number of points for each of your puffs.
Accumulate your points and improve your Score to reach different ranks ranging from Iron to King!
Pnp Coils Compatible With Drag X & Drag S Pods
The two pods are compatible with all of Voopoo’s PnP resistors and thus share this common point with the Pod Vinci. There are no less than six compatible coils in total (from 0.15 to 0.8 ohm) for a versatile and customizable vape indirect (DL) or indirect (MTL) inhaling.
It is recognized for its flavor, power, and durability qualities. PnP resistors have the advantage of not having any screws.
Plug & Vape! Simply push the resistors directly under the cartridge to install them.
Each pod comes with two PnP resistors of different powers:
Coils included with the Pod Drag S Kit:
- PnP-VM1 resistance in 0.3 ohm (use between 32 and 40W)
- PnP-VM5 resistance in 0.2 ohm ( use between 40 and 60W)
Coils included with the Pod Drag X Kit:
- PnP-VM1 resistance in 0.3 ohm (use between 32 and 40W)
- PnP-VM6 resistance in 0.15 ohm ( use between 60 and 80W)
Leave a reply