The Voopoo Argus Z vape kit is a popular choice among vapers for its sleek design, great performance, and user-friendly features. However, like any electronic device, it is not exempt from encountering issues from time to time.
In this article, we will discuss some common issues that users may face with the Voopoo Argus Z vape kit and provide troubleshooting tips to help you resolve these problems.
1. Device Not Turning On
One of the most common issues users may face with the Voopoo Argus Z vape kit is the device not turning on. If you are experiencing this problem, here are some troubleshooting steps you can try:
Check the battery:
Ensure that the device is adequately charged. Connect the device to a power source using the included USB cable and allow it to charge for at least 15-20 minutes. If the battery is completely drained, it may take longer to power on.
Check the battery connection:
Make sure the battery is properly inserted and securely connected to the device. Clean the battery contacts and terminals if needed.
Try a different battery:
If you have access to another compatible battery, try using it to see if the issue persists. If the device powers on with a different battery, the original battery may be faulty and require replacement.
2. No Vapor Production
If you are not getting any vapor production from your Voopoo Argus Z vape kit, here are some troubleshooting tips to consider:
Check the coil:
Verify that the coil is properly seated in the tank and screwed tightly. If the coil is loose, it may not make proper contact with the battery and may result in no vapor production.
Prime the coil:
Ensure that you have properly primed the coil before using it. This involves saturating the coil with e-liquid and allowing it to soak for 5-10 minutes to prevent dry hits. Follow the manufacturer’s instructions for priming the coil.
Check the e-liquid level:
Make sure that the tank has sufficient e-liquid to produce vapor. If the tank is empty or running low, refill it with your preferred e-liquid.
Adjust the wattage:
Increase the wattage setting on your device to see if it improves vapor production. However, be cautious not to exceed the recommended wattage range for your specific coil.
3. Leaking Issues
Leaking is a common problem that can occur with any vape kit, including the Voopoo Argus Z. To troubleshoot leaking issues, consider the following steps:
Check the tank assembly:
Ensure that all the tank components, including the coil, chimney, and glass tube, are properly assembled and screwed tightly. Loose connections can result in e-liquid leakage.
Clean the tank:
Disassemble the tank and clean it thoroughly using warm water. Dry all the components before reassembling. This helps remove any e-liquid residues that may contribute to leaking.
Adjust the airflow:
Check the airflow control on the device and make sure it is not set to its maximum. Too much airflow can cause e-liquid to leak out of the tank. Adjust the airflow to a level that provides a satisfactory vaping experience without causing leakage.
4. Dry Hits/Burnt Taste
Experiencing dry hits or a burnt taste when using the Voopoo Argus Z vape kit can be frustrating. Here’s how you can troubleshoot this issue:
Check the e-liquid level:
Ensure that the tank has enough e-liquid to prevent the coil from drying out. Refill the tank if it is running low.
Prime the coil:
Properly prime the coil before using it to prevent it from burning. Follow the manufacturer’s instructions for priming the coil and allow sufficient time for the e-liquid to saturate the coil.
Reduce wattage:
If the wattage setting is too high, it can cause the coil to overheat and result in dry hits. Start at a lower wattage and gradually increase it until you find the sweet spot that provides a satisfying vape without burning the coil.
Replace the coil:
If the coil is old or has been used for an extended period, it may be time to replace it. Overused coils can develop a burnt taste and are less effective at vaporizing e-liquid.
5. Battery Life/Charging Issues
Issues with battery life or charging can be a concern for many vapers. Here are some troubleshooting tips to help resolve these problems:
Check the charging cable and port:
Ensure that the charging cable is in good condition and properly connected to the device. Clean the charging port if there is any debris or dust that may hinder the charging process.
Different charging source:
Try charging your device using different power sources, such as a wall adapter, computer, or power bank. This helps determine if the issue lies with the device or the power source.
Reset the device:
Sometimes, a simple device reset can resolve battery life or charging issues. Consult the user manual for instructions on how to perform a reset on your specific device.
Conclusion:
The Voopoo Argus Z vape kit is a reliable and high-performing device. However, like any electronic device, it can encounter issues from time to time. By following the troubleshooting tips mentioned in this article, you can effectively resolve common issues such as the device not turning on, no vapor production, leaking issues, dry hits, and battery life/charging problems. If you are unable to resolve the problem on your own, it is recommended to contact the manufacturer’s customer support or seek assistance from a professional vape shop. Remember to always follow proper safety precautions when troubleshooting or handling any vaping device.