With its futuristic retro look that would make R2D2 jealous, the Pod Seal seems straight out of an old Star Wars from the 70s! More creative than ever, the designers of the Voopoo brand have created an all-in-one electronic cigarette made from high-quality silicone. It is a small 40 Watt Pod that incorporates a 1200 mAh battery. It has an automatic vaporization mode and a removable 2ml cartridge.
Pod Seal by Voopoo
Two years have passed since the famous Drag X and DraS Pods release. Vapers are galvanized by their worldwide success. The Voopoo brand never stays behind, but they always create new pods to make the vaping experience perfect over time and create all-in-one electronic cigarettes. Voopoo takes a step towards safety and robustness with the Pod seal while maintaining an ultra-compact format. It is entirely covered in silicone. This pod has adequate protection against water splashes but also against scratches and fingerprints.
It is available in 5 colors. Thanks to its rounded shape, it fits naturally in the palm of the hand and holds your balance correctly when placed on a flat surface. Without having the IP67 certification of electronic cigarettes from the Geek Vape brand, the Pod Seal still obtains the IP66 certification! It is also resistant to water splashes and dust, and it will easily survive light shocks and small falls.
The Pod Seal is also protected under its base by a silicone cap, thus preventing water infiltration into the 5V/1A USB Port. This Voopoo electronic cigarette is a champion in the field of compactness. It has a height of barely 10cm and a diameter of 26mm. This pod does not weigh very heavily on the scale. It only weighs 72g! It is practical to use and easily transportable. The Pod Seal will be discreet and will slip into any pocket.
An Adjustable Airflow System
Airflow System is located on the rear part of the pod. Pod Seal is characterized by a slider, which directly recalls the design of the manufacturer’s Drag and Argus Pods. This system with two openings allows the vaper to personalize their draw in indirect inhaling (MTL) or direct restrictive (RDL). The air enters through the two openings with five holes and effectively cools the resistance from below.
Seal Pod Interface and Modes
Despite these 10 centimeters in height, the Pod Seal does not deprive itself of anything and incorporates a beautiful 0.54″ OLED screen in an oval shape. After five quick presses on the Fire button to turn on the pod, a minimalist and functional interface displays the essential information:
- Battery life
- Power value displayed in Watts
- Mode used (“P” or “A”)
- Value of resistor used
- Puff counter
The adjustment buttons located below the screen offer the user the possibility of making their own power adjustments. The power is displayed in Watts and is configurable from 5 to 40 Watts. At the controls of the Pod Seal, we can find the famous “GENE” chipset! It is convenient, and the latter detects the value of the resistance used and automatically offers the most suitable power for it. For optimal protection, the chipset restricts the power setting so as not to exceed the maximum setting authorized by your resistance.
Using Pod Seal Modes
It is ideal for new vapers, and the Pod Seal offers two modes of use to customize the triggering of the vaporization. You can perform three quick presses on the Fire button to change mode :
- Mode A: This mode activates automatic vaporization triggered by suction. It is enough to aspire to start the vaporization in the same way as on a traditional cigarette.
- P Mode: This mode removes auto vaping in favor of using the Fire button.
Pod Seal Features
- On / Off: You can on it with five quick presses of the Fire Button
- Mode change: 3 quick presses of the Fire Button
- Puff counter reset: Hold the fire button and the “+” button simultaneously.
- Locking the power setting: Simultaneously hold the “+” and “-” buttons.
Cartridges Compatible with the Pod Seal
Voopoo is once again highlighting its excellent Drag cartridges! Vapers highly appreciate it. The PCTG cartridges have a magnetic base securely attached to the top of compatible Pods. The Pod Seal comes with the PNP MTL cartridge. As its name suggests, this cartridge is intended for an indirect inhaling vape (MTL) and has a 2ml reservoir.
Its Drip Tip (not removable) is flared in shape and allows the vapor to condense for better flavors. There are two silicone protections in the box. One corresponds to the PNP MTL 2ml cartridge format and the other to that of the PNP 4.5ml cartridge (not included). Indeed, the latter is 100% compatible with the Pod Seal! Therefore, the user can easily obtain this cartridge with a larger capacity to access a more aerial style of vape.
How to Fill the Seal Pod Tank?
The PNP MTL cartridge has exactly the same mode of operation as the PnP cartridges. The filling method is simple and fast. To do this, simply extract your magnetic cartridge and turn it over to access the filling hole. A silicone tab protects this hole. Lift the tab, insert the pipette of your E-Liquid bottle inside the hole and fill up!
Compatible with PNP Resistors
Indeed, the Pod Seal is specially designed for the vape in indirect inhaling (MTL). It is compatible with almost the majority of PnP resistors from Voopoo. The pod only has a maximum power of 40W. It will not be able to generate the power necessary to operate the PNP resistors VM5 (0.2 Ohm) and VM6 (0.15 Ohm). The Rba PnP Mono Coil chainring is also compatible for vape enthusiasts.
The Pod Seal comes with 2 PnP resistors, specially created for indirect inhalation:
- 1 PnP-TR1 resistor of 1.2 ohms: use between 10 and 15W.
- 1 PnP-TM2 resistor of 0.8 ohms: use between 12 and 18W.
How to Change the PNP Resistance of the Seal Pod?
Does your pod produce less vapor than usual? Does your typical E-Liquid no longer taste the same? It’s time to change resistance! Nothing could be simpler, just remove your PNP cartridge and return it.
- Pull-on the used resistor to extract it
- Pour a drop of E-Liquid on the visible parts of the cotton of your new resistance.
- Push your new PNP resistor into the free slot
- Reattach the magnetic cartridge to the top of your pod
Leave a reply